HP-UX Virtual Partitions Ordering and Configuration Guide (March 2012)

Table 25 vPars A.05.05, A.05.06, and A.05.07 Minimum Required Card-Related Firmware (EFI,
ROM, and Boot Code) (continued)
Flash Utility
VersionFlash Utility
Boot Code
File
Network
(NIC) EFI
Firmware
Version
FC/SCSI/RAID
HBA
Firmware
Version
FC/SCSI/RAID
EFI Driver
VersionDescription
Card
Product
Number
2.50
B.00.38
efiutil.efi
FCFUPDATE
——04.03.022.01HP PCIe 1-port 8Gb
FC SR (QLogic)
HBA
AH400A
2.50
B.00.38
efiutil.efi
FCFUPDATE
——04.03.022.01HP PCIe 2-port 8Gb
FC SR (QLogic)
HBA
AH401A
1
The card utilizes the EFI driver that is in the platform’s system firmware.
2
This card has the following minimum system firmware requirements:
• rx7640, rx8640: SFW 9.48, Field Release v4.1
• Superdome on sx2000 (Integrity): SFW 9.48, Firmware Recipe 8.7e
3
The workaround for QXCR1000753480 (Long hardware path from card not recognized by vparmodify) is required
when using this card. For the workaround, see the HP-UX Virtual Partitions Release Notes A.05.03 available on the BSC
website at: http://www.hp.com/go/hpux-vpars-docs
4
Ensure that you install the EFI Boot Services Driver version 3.05.01.01 or later versions.
Table 26 vPars A.05.07 or later Minimum Required Card-Related Firmware for Superdome 2 (EFI,
ROM, and Boot Code)
Flash Utility
Version
Flash
Utility
Boot Code
File
Network
(NIC) EFI
Firmware
Version
FC/SCSI/RAID
HBA
Firmware
Version
FC/SCSI/RAID
EFI Driver
Version
Card
TypeDescription
Card
Product
Number
1
———4.01a52.82x4—FIBRE
CHANNEL
HP PCIe
single port,
4GB, Fiber
Channel (FC),
and single
port
1000Base-T
adapter
AD221A
———4.01.a52.82x4—FIBRE
CHANNEL
HP PCIe
single port,
4GB, Fiber
Channel (FC),
and two port
1000Base-T
adapter
AD222A
———4.01a52.82x4—FIBRE
CHANNEL
HP PCIe
single port,
4GB, Fiber
Channel (FC),
and two port
1000SX
adapter
AD393A
———2.225.03.15—FIBRE
CHANNEL
HP PCIe
single port,
8GB, Fiber
Channel (FC),
SR (Qlogic)
HBA
AH400A
58 Supported Configurations