HP-UX Virtual Partitions Ordering and Configuration Guide (March 2012)

Table 26 vPars A.05.07 or later Minimum Required Card-Related Firmware for Superdome 2 (EFI,
ROM, and Boot Code) (continued)
Flash Utility
Version
Flash
Utility
Boot Code
File
Network
(NIC) EFI
Firmware
Version
FC/SCSI/RAID
HBA
Firmware
Version
FC/SCSI/RAID
EFI Driver
Version
Card
TypeDescription
Card
Product
Number
1
————4.3.01—NetworkingHP PCIe dual
port, 4GB,
Fiber Channel
(FC), and
dual-port
1000Base-X
adapter
AD393
———2.12A53.104.356.6—NetworkingHP PCIe
dual-port,
8Gb FC and
2p 1/10GbE
Adapter
AT094A
———5.0.1.193.104.356.6—NetworkingHP PCIe 2
port
(CN1100E)
FlexFabric
Adapter
AT111A
———2.12.A53.104.356.6—NetworkingHP Integrity
NC552SFP
2P 10GbE
Adapter
AT118A
————5.16b0—SASHP PCIe SAS
SA P411
256MB Ctlr
AM311A
————5.16b0—SASHP PCIe SAS
SA P812 1G
Flash Cache
AM312A
B.00.44FCFUPDATE5.2.51
2
5.2.27
2
———PCIe 2-port
10GbE-SR
AM225A
B.00.44FCFUPDATE5.2.51
2
5.2.27
2
—–—PCIe 2-port
10GbE-LR
AM232A
B.00.44FCFUPDATE5.2.51
2
5.2.27
2
———PCIe 2-port
10GbE-Cu
AM233A
1
In addition to the cards supported for vPars A.05.07, three new cards listed here are supported for vPars A.05.08.
2
HP recommends that you update EFI driver to version 5.2.53 and boot code to version 5.2.70.
NOTE: AT094A, AT111A and AT118A have a minimum System Firmware requirement of
v2.51.102.
4.4.4 Checking Card Firmware Versions (Integrity)
EFI Drivers
In nPars mode from the EFI Shell, use the drivers command to determine the version. The VERSION
column lists the version. For example:
Shell> search all
Shell> drivers
T D
D Y C I E
R P F A B
V VERSION E G G C #D #C DRIVER NAME IMAGE NAME Comments
60 Supported Configurations