HP-UX Virtual Partitions Ordering and Configuration Guide (March 2012)

4.5 Software Applications
For a complete list of software requirements and product support and interactions, refer to the
HP-UX Virtual Partitions Administrator Guide.
4.5.1 Application Certification
Applications running on top of HP-UX using vPars run the same as when run on HP-UX native-mode
(standalone). No changes, recompilation, or re-certification are required for applications running
in the virtual partitions unless otherwise noted.
4.5.2 VSE Management Software
For system requirements and installation procedures related to the Virtual Server Environment (VSE)
Management Software, refer to the VSE Management Software Installation and Update Guide.
The latest documentation for the Virtual Server Environment, including VSE Management Software
and HP partitioning products, is available at the following website:
http://www.hp.com/go/virtualization-manuals
4.5.3 Mixed Minor Versions – vPar A.04.xx and A.05.xx
Virtual Partitions can be used at different Operating Environment (OE) levels. For more information
about the supported configurations and guidelines for operating mixed HP-UX versions environment,
see the most recent HP-UX Virtual Partitions Administrator Guide available on the BSC website at
www.hp.com/go/hpux-vpars-docs.
4.5.4 Ignite-UX Version
vPars A.05.xx
See the Ignite-UX product documentation for the Ignite-UX version required for HP-UX 11i v3; vPars
itself has no special requirements. At this time, HP-UX 11i v3 requires Ignite-UX version C.7.1.x or
later.
vPars A.04.xx
Ignite-UX version C.6.2.241 or later is required.
NOTE: Do not use Ignite-UX version C.6.3.xx. For the latest version of Ignite-UX, see Ignite-UX
at the Software Depot website at http://www.hp.com/go/softwaredepot.
NOTE: Ignite-UX C.6.8 or later will not work with vPars A.04.01 on PA-RISC systems. Either use
an Ignite version earlier than C.6.8 and later than C.6.2.241 or upgrade to vPars A.04.02.
vPars A.03.xx
Ignite-UX version B.3.7 or later is required.
4.5.5 WLM Version
For detailed information on WLM compatibilities including required versions, see the WLM product
Release Notes available at http://www.hp.com/go/wlm.
• When using vPars, WLM, and iCAP on the same system, you will need the following minimum
versions:
64 Supported Configurations