HP-UX Virtual Partitions Ordering and Configuration Guide (May 2012)

Table 9 Server Support for vPars Releases (continued)
A.05.07, A.05.08
and A.05.09
A.05.04, A.05.05,
and A.05.06
A.04.06 and
A.04.07A.03.05Server Model
YesYesYesYesSuperdome (PA-8600,
PA-8700)
YesYesYesYesSuperdome on sx1000 chipset
(PA-8800, PA-8900)
YesYesYesYesSuperdome on sx2000 chipset
(PA-8900)
YesYesYesNorx7620
YesYesYesNorx8620
YesYesYesNorx7640
YesYesYesNorx8640
YesYesYesNoSuperdome on sx1000 chipset
(Integrity)
YesYesYesNoSuperdome on sx2000 chipset
(Integrity)
YesNoNoNoSuperdome 2 (SD2) (Integrity)
2
1
The carrier-grade version of rp5470 is not supported by vPars.
2
In SD2, the implementation of Virtual Partitions has changed. For more information, see the HP Superdome 2 Partitioning
Release Notes and HP Superdome 2 Administrator Guide on the BSC website at http://www.hp.com/go/hpux-vpars-docs.
4.2.2 Processors and Chipsets
Unless otherwise noted, all vPars versions support any processors that are supported by the HP-UX
OS instance for use on the servers. This includes but is not limited to the following processors:
PA-8500
PA-8600
PA-8700
PA-8800
PA-8900
all Intel® Itanium®
Notes about vPars Support for Processors
The following are additional details about vPars support for processors.
vPars A.03.01 or later is required when using PA-8800 and above processors.
vPars A.03.04 or later—or vPars A.04.04 or later—is required when using HP 9000 servers
based on the sx2000 chipset (rp7440, rp8440, and HP 9000 Superdome with sx2000
chipset). Also, PHNE_36225 (cumulative mux and pty patch) must be installed.
vPars A.04.02 or later is required when using Integrity servers based on the sx2000 chipset.
Further, the sx2000 chipset requires the PHKL_34088 bootloader patch.
vPars A.04.02 or later is required when using the Dual-core Intel® Itanium® (Montecito)
processor (HT (Hyperthreading) OFF only). HP-UX 11i v2 requires the September 2006 HP-UX
11i v2 release or later when using the Dual-core Intel® Itanium® (Montecito) processor.
vPars A.05.01 or later is required when using the Dual-core Intel® Itanium® (Montecito)
processor (HT ON/OFF). HP-UX 11i v3 requires the February 2007 HP-UX 11i v3 release or
26 Supported Configurations