HP-UX Virtual Partitions Ordering and Configuration Guide (May 2012)

the network card used is the card of the source virtual partition. Check whether your card is
supported for boot. For information on setting up a boot helper, see the Ignite-UX Administration
Guide (Table of Supported Bootable Cards for Integrity Serversin Appendix C).
Transitioning from Cards on PA-RISC to Integrity
Not all cards supported for boot on PA-RISC are supported for boot on Integrity. For more
information go to the BSC website at www.hp.com/go/hpux-iocards-docs and refer the support
matrix documents.
Table 15 uses the following legend to indicate the type of boot support for each card on the various
server models.
Bb — Bootable combo HBAb — Bootable networking HBAB — Bootable mass storage HBA
N1 — Not supported with IOXN — Not supportedD — Data only (not bootable)
Table 15 Bootable Cards Supported for vPars on Integrity
Supported
vPars
Release(s)
Integrity
Superdome
2
Integrity
Superdome
on sx2000
Integrity
Superdome
on sx1000
rx7640,
rx8640
rx7620,
rx8620Card TypeDescription
Card
Product
Number
A.05.08,
A.05.09
bbNbNNetworkingHP Integrity
10GbE-SR 2p
PCIe Adapter
AM225A
A.05.08,
A.05.09
bbNbNNetworkingHP Integrity
10GbE-LR 2p
PCIe Adapter
AM232A
A.05.08,
A.05.09
bbNbNNetworkingHP Integrity
10GbE-Cu 2p
PCIe Adapter
AM233A
A.04.01,
A.04.02,
A.04.03,
A.04.04,
A.04.05,
A.04.06,
A.04.07
A.05.01,
A.05.02,
A.05.03,
A.05.04,
A.05.05,
A.05.06,
A.05.07,
A.05.08,
A.05.09
NBBBBMass Storage2G FC TachliteA6795A
34 Supported Configurations