HP-UX vPars 6.0 N-Port ID Virtualization (NPIV) - A brief overview

12
vparmodify—to delete an NPIV resource
The vparmodify command is also used to delete a vHBA from a vPar. The NPIV resource specification may be copied
directly from the vparstatus output.
Example:
vparmodify -p vPar1 \
-d hba:avio_stor:0,4,0x50060b00006499b8,0x50060b00006499b9:npiv:/dev/fcd1
NOTE:
The vPar must be DOWN to execute this command.