HP Virtual Connect Enterprise Manager 6.3 CLI Guide

set fcoe-connection
The -set fcoe-connection command modifies an existing FCoE connection.
Syntax
set fcoe-connection –profilename <profileName>
-portnumber <PortNumber>
[-fabric <FabricName>]
[-speedtype <1Gb|2Gb|4Gb|8Gb|Custom|Disabled>]
[–customspeed <100–10000>]
[–bootpriority <priority>]
[–bootport <portName>]
[–bootlun <LUN>]
Parameters
Table 17 Parameter descriptions for -set fcoe-connection
OptionalRequiredDescriptionParameter
xThe name of the profile to
which the FcOE connection
will be assigned.
-profilename
xThe port number of the
connection.
-portnumber
xThe name of the FCoE SAN
fabric to associate with the
connection.
-fabric
xThe requested operational
speed for the server port.
Valid values include 1Gb,
2Gb, 4Gb, 8Gbcustom,
and disabled. If the speed
type is custom, you can
configure any speed from
100Mb-10Gb in 100Mb
increments. The
-customspeed parameter
is required if the speed type
is custom and is the
user-defined speed for the
server port. Valid values
include 100Mb-10Gb
configured in 100Mb
increments The acceptable
value is 100 to 10000
Mb/s.
-speedtype
set fcoe-connection 41