HP Virtual Connect Enterprise Manager 6.3 CLI Guide

set server-port-map
The -set server-port-map command modifies the properties of a server port network mapping.
NOTE: This command cannot be used if the domain setting vlantagcontrol is currently set
to tunnel.
Syntax
-set server-port-map –profilename <profilename>
-portnumber <PortNumber>
-network <Network Name>
[-vlanid <VLan Id>]
[–untagged <true|false>]
Parameters
Table 25 Parameter descriptions for -set server-port-map
OptionalRequiredDescriptionParameter
xThe name of an existing
profile to associate with the
server-port-map to be
modified.
-profilename
xThe number of the port to
modify the server-port-map
for.
-portnumber
xThe name of a valid Ethernet
network to associate with the
mapping.
-network
xThe new VLAN ID used for
mapping the server port to
the network. Valid VLAN ID
values are 1-4094.
-Vlanid
xEnables or Disables the
network in order to handle
untagged packets. Only one
network in an
enet-connection can be
made to handle untagged
packets.
NOTE: If a Shared
Uplinkset is being used, then
an untagged network will be
the same as the native
network if present. However,
any network can also be
configured to handle
untagged packets.
NOTE: When changing a
network untagged option
from true to false you
must provide a VLAN ID if
the global option
sharedservervlanid is
set to false.
-untagged
Output
The function returns the result of the set operation or a jobid if –nb is specified.
60 Using VCEM commands