HP Virtual Connect Enterprise Manager 6.3 CLI Guide

Table 32 VCEM server error messages and descriptions (continued)
Error message descriptionError message number
In the FC SAN connection for port number and interconnect
bay , the specified boot target WWPN is not well-formed.
Valid formats are xx:xx:xx:xx:xx:xx:xx:xx.
xx-xx-xx-xx-xx-xx-xx-xx, or xxxxxxxxxxxxxxxx, where each
x is a hexadecimal digit.
2678
In the FC SAN connection for port number and interconnect
bay , the specified boot target LUN is invalid. Valid values
are either a 3-digit decimal between 0 and 255, or a 13
to 16-digit hexadecimal between 0 and FFFFFFFFFFFFFFFF.
2679
In the FC SAN connection for port number and interconnect
bay , the selected FC SAN fabric does not have a physical
connection to this port.
2680
Invalid number of WWN addresses in the FC SAN
connection for interconnect bay . VCEM does not support
multiple WWPN addresses per physical port when using
Factory-Default WWN addresses.
2681
Missing base initiator configuration in FC SAN connection
for interconnect bay .
2682
Cannot perform server profile assignment because bay is
an auxiliary server blade.
2683
Cannot assign server profile because the selected bay is
covered.
2684
The slot number associated with node is not valid for a
server blade. Valid numbers are 1 - 16.
2709
HP SIM did not find an cabinet associated with node .2710
Cannot create FC SAN connection because the maximum
number of FC SAN connections was reached.
2717
The operation could not be performed because Server
Profile already contains the maximum number of network
connections.
2718
Cannot remove FC SAN connection because the Server
Profile does not have a FC SAN connection
2719
Cannot remove Multiple Network because the Server Profile
does not have more available Multiple Networks to be
removed.
2720
Could not remove the connection because the port number
was not found.
2721
Could not set the Multiple Network because the given port
was not found.
2722
Only one VNet can be Untagged.2723
The provided configuration for multiple networks exceeds
the maximum allowed number of VNet mappings. The
maximum number of VNet mappings is 28.
2724
There are duplicated VNet Names. Choose a different one.2725
The entered VLAN id is not valid. Please enter a valid value
(1-4094) for Server VLan Id.
2726
The vNet name cannot be Unassigned. Select one vNet
name for each mapping.
2728
76 Error messages