HP Virtual Connect Enterprise Manager 6.1 User Guide
VC Domain configuration must be identical to the VC Domain Group configuration. Verify that the following
items are identical:
• Interconnect bays location and model
• Enclosure model
• Domain settings:
Configuration for double density servers (for example, BL2x220c)•
• Configuration for full-height and half-height single density servers (for example, BL460c, BL480c)
• Ethernet settings:
MAC Cache Failover:•
• Enable Fast MAC Cache Failover
• MAC Refresh Interval
• IGMP Snooping:
Enable IGMP Snooping•
• IGMP Idle Timeout Interval
• Server VLAN Tagging support:
Tunnel VLAN Taggings or Map VLAN Taggings•
• Force Server connection setting
• Multiple Network Speeding Settings:
Preferred Link Connections•
• Preferred Link Connection Speed
• Maximum Link Connection
• Maximum Link Connection Speed
• Network SNMP settings:
• Read Community
• System Contact
• IP addresses
• Fibre Channel SAN Fabric settings:
Enables SMI-S•
• Fibre Channel SNMP settings: Read Community, System Contact, and IP addresses
• Network and Fibre Channel SAN Fabrics uplinks
• For each single network uplink:
Network name•
• Smart link
• Private Network
• Enable VLAN Tunneling
• State
• Network port location
• Speed/duplex mode
• Connection mode
• Preferred Link Connection
• Preferred Link Connection Speed
28 Managing VC Domains