HP Virtual Connect Enterprise Manager 6.1 User Guide

(Optional) You can provide a new name for the unconfigured VC Domains. Valid VC Domain Group
names are alphanumeric, hyphens (-), underscore (_), and cannot exceed 64 characters.
2. Enter the username and password for each VC Domain. Ensure you provide VC Domain credentials
with full privileges. VC Domains appear as:
• Unconfigured domains, which appear in the System Name column with the unassigned name,
VCD_name
• Configured domains, which appear in the System Name column with their previously assigned
name
3. Enter the username and password for the Onboard Administrator of each unconfigured VC Domain.
Ensure you provide the Onboard Administrator credentials with full privileges if the Virtual Connect
Module is not configured.
(Optional) In some cases you might want to overwrite the existing VC Domain configuration for selected
VC Domains. To enable this action, select Existing VC Domain configuration settings for selected
VC Domain(s) without server profiles will be overwritten by selected base VC Domain
configuration defined for the VC Domain Group. In this case, VCEM validates that the selected VC
Domain configurations match the VC Domain Group configuration. VC Domains that are already
configured and have server profiles are not affected.
4. Enter the VC Domain Group name in the VC Domain Group Name field. Valid VC Domain Group
names are alphanumeric, hyphens (-), underscore (_), and cannot exceed 64 characters.
5. From the Configuration based on VC Domain list, select the VC Domain configuration upon which the
new VC Domain Group is to be based. The Configuration VC Domain list contains only configured VC
Domains.
6. From the Select MAC range type list, select whether the MAC address range type is VCEM-defined,
user-defined, or factory-default. You can only select the User-Defined option for MAC range type if a
MAC custom range is defined.
7. From the Select WWN range type list, select whether the WWN address range type is VCEM-defined,
user-defined, or factory-default. You can only select the User-Defined option for WWN range type if a
WWN custom range is defined.
8. From the Select Serial Number range type list, select whether the Serial Number address range type is
logical serial number, or factory-default.
9. Click OK. The Virtual Connect Enterprise Manager is executing the request message
appears.
10. Click OK to go to the Jobs page and monitor job progress.
11. (Optional) After creating a VC Domain Group from the HP SIM User and Authorization page, select
the user authorization privileges for that VC Domain Group. The following table lists the privileges for
selection.
DescriptionAdministrator Privileges
This role provides only view-only access to VCEM pages and is
based on the previous VCEM Read Only role.
VCEM User (read only)
This role enables you to perform some of the tasks of the VCEM
Domain Group Operator except for creating, editing, or deleting
a server profile.
VCEM Group Limited Operator
This role enables you to manage server profiles within one or more
specific VC Domain Groups. Only server profile operations within
the chosen VC Domain Group are permitted.
VCEM Domain Group Operator
This role enables you to manage VC Domains and server profiles
within one or more specific VC Domain Groups. All operations
within the chosen VC Domain Group are permitted.
VCEM Domain Group Administrator
This role provides access to all VCEM operations and is formerly
known as VCEM Full Access.
VCEM Administrator
36 Managing VC Domains