HP Virtual Connect Enterprise Manager 6.1 User Guide

VC Domain(s) without server profiles will be overwritten by selected base VC Domain
configuration defined for the VC Domain Group. In this case, VCEM validates that the selected VC
Domain configurations match the VC Domain Group configuration. VC Domains that are already
configured and have server profiles are not affected.
7. Select the VC Domain Group name to which you want to add the selected VC Domains.
8. Click OK. The Virtual Connect Enterprise Manager is executing the request message
appears.
9. Click OK to go to the Jobs page and monitor job progress.
Removing a VC Domain from a VC Domain Group
IMPORTANT: If you remove the last VC Domain from a VC Domain Group, the unassigned server profiles
will be located at this VC Domain.
VCEM detects the presence of logical server managers or upper level managers. When performing selected
tasks, a prompt dialog message appears and explains the impact of performing that task from outside the
logical server manager or upper level manager. The following message appears:
IMPORTANT: VCEM has detected you may be using other products, such as HP Insight
Dynamics – VSE. Removing this VC Domain from its VC Domain Group will make it
and any Server Profiles in this VC Domain unmanageable by this upper level
manager. Type YES to proceed with this operation.
To proceed, you must type YES, and then click OK. VCEM does not proceed if you cut and paste YES into
the field.
MAC, WWN, and serial number ranges enable Virtual Connect Manager to manage the allocation of new
addresses when you are releasing the VC Domain control back to Virtual Connect Manager, such as when
deleting the VC Domain Group or removing the VC Domain from a VC Domain Group. HP recommends
that you provide MAC, WWN, and serial number ranges that are:
• Not in use by VCEM.
• Not in use by any other VC Domain in your network
You can click Remove from VCD Group only if the current selection contains VC Domains that belong to VC
Domain Groups.
After removing a VC Domain from a VC Domain Group, you can edit or change the existing profiles from
the Virtual Connect Manager user interface.
To remove a VC Domain or VC Domains from a VC Domain Group:
1. From the VC Domains page, select the VC Domains to be removed.
2. Click Remove from VC Domain Group. The Remove VC Domains Group information from VC Domain
Group appears below the table.
38 Managing VC Domains