HP Virtual Connect Enterprise Manager 6.1 User Guide

later than the current VC Domain Group firmware version. Otherwise, the upgrade firmware mode for the
VC Domain Group will not be allowed.
Upgrade VC Domain Group Firmware Mode enables you to upgrade the VC firmware mode of VC Domain
Group according to the VC firmware versions of VC Domains that belong to the VC Domain Group. To
upgrade the VC Domain Group firmware mode to a later version:
1. Select to the VC Domain Group to be upgraded.
2. From the VC Domain Group page, click Upgrade Firmware Mode.
3. Select a firmware version from Upgrade Firmware Mode to.
4. Click OK. The Virtual Connect Enterprise Manager is executing the request message
appears with a job ID code.
5. Click OK to go to the Jobs page and monitor job progress.
Deleting a VC Domain Group
IMPORTANT: If you delete a VC Domain Group, then all unassigned server profiles within that VC Domain
Group will be posted to one of the VC Domains that were part of the deleted VC Domain Group. To verify
which VC Domain contains the unassigned server profiles after the VC Domain Group deletion job is
completed, look at the report generated by the related job in the VCEM event. To access this report from
the HP SIM left navigation panel, select Events→Shared→VCEM Events.
IMPORTANT: This VCEM operation does not provide a reference to the VC Domain from HP SIM. To access
this reference, you must correlate the HP SIM and Virtual Connect logs. For more information, see Correlating
VCEM operations in HP SIM and Virtual Connect logs.
VCEM detects the presence of logical server managers or upper level managers. When performing this task,
a prompt dialog message appears and explains the impact of performing that task from outside the logical
server manager or upper level manager. The following message appears:
IMPORTANT: VCEM has detected you may be using other products, such as HP Insight
Dynamics – VSE. Deleting this VC Domain Group will make it and any Server
Profiles in this VC Domain Group unmanageable by this upper level manager.
Type YES to proceed with this operation.
To proceed, you must type YES, and then click OK. VCEM does not proceed if you cut and paste YES into
the field.
To delete a VC Domain Group:
1. Click the VC Domain Groups tab. The VC Domain Groups page appears.
2. Select the VC Domain Groups to be deleted.
3. Click Delete. The Delete VC Domain Group page appears.
VC Domain Groups 53