HP Virtual Connect 3.75 Release Notes
Fixes 6
o
Support for 2048 bit SSL certificates and configurable SSL-CSR
o Activity logging improvements for TACACS+ accounting
o Option to disable local account access when LDAP, RADIUS, or TACACS+ authentication is
enabled
o Increased the default VCM local user account minimum required password length
o SNMP access security to prevent access from unauthorized management stations
• SmartLink failover improvements
• IGMP “NoFlood” option when IGMP snooping is enabled
• Browser support:
o Internet Explorer 8 and 9
o Firefox 10 and 11
• Firmware upgrade rollback from a previous firmware upgrade without domain deletion
Fixes
The VC 3.75 release resolves the following issues:
• An error message: "The operation resulted in the following error null" appeared when trying to copy a
working profile with multiple networks that belong to a user-defined network access group.
• HP VC 4/8 Gb 20-port FC modules could not operate at 8Gb reliably when connecting to Cisco Nexus
5xxx series switches.
• The "Go to Network" action on the Ethernet Networks (Server Connections) screen did not open the Edit
Network screen.
• The Virtual Connect Manager CLI did not allow modification of an already existing Ethernet profile
connection with an index of 100 or higher.
• An extra button appeared when using Internet Explorer 8 to view the Detailed Statistics screen for FC
uplink ports on a VC FlexFabric module. If this button was clicked, and then the Back to Previous Page
button was clicked, it changed the tabs in the main window. The extra button is removed.
• DCC stayed unavailable after server power on and online speed changes failed.
• VCM CLI parameters passed to commands were not being enclosed by quotes, and any quotes
embedded in the data should also be protected by an escape character.
• The Name-server had the wrong portID and WWN displayed. This issue usually occured when power
cycling all servers in an enclosure at the same time.
• Resolved an issue caused by enabling the "Prevent flooding of unregistered multicast traffic" option
when using VCEM to manage the VC domain with the "VCEM Compatibility Mode" set to a VC
firmware version earlier than 3.70.
The VC 3.70 release resolves the following issues:
• A non-user friendly SOAP error message appeared in the GUI after a DELETE DOMAIN confirmation.
This might have happened when a user logged in with multiple sessions tried to log out from one session
(either a tab or window), or if another user deleted the VC domain.