HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 4.01 User Guide

Command line 105
Item Description
string>][Format=<SNMPv1|SNMPv2>][Severity=<trap
severity|All|None>][DomainCategories=<domain trap
category|All|None>][EnetCategories=<enet trap
category|All|None>][FcCategories=<fc trap
category|All|None>]
Parameter
Name (required)
A unique name for the new trap being added
Properties
Address (required)
IPv4 address or DNS name for the trap destination
Community (optional)
The SNMP communit
y name string for the specified trap. If not specified, the default
value is "public". For VC-Enet modules, the maximum string length is 39. For VC-
FC
modules, the maximum string length is 24.
Format
Format of the new trap. Valid values are "SNMPv1" and "SNMPv2". If not
specified, the default is "SNMPv1".
Severities
Trap severities to send to the destination. Valid values are "Normal", "Unknown",
"Info", "Warning", "Minor", "Major", "Critical", "All", and "None". Multiple
severities can be specified, separated by commas. The default severity is "None".
DomainCategories
The Virtual Connect domain trap categories to send to the destination. Valid values
are "Legacy", "DomainStatus", "NetworkStatus", "FabricStatus", "ProfileStatus",
"ServerStatus", "EnetStatus", FcStatus", "All", and "None". Multiple categories can
be specified, separated by commas.
EnetCategories
The Virtual Connect Ethernet trap categories to send to the destination. Valid values
are "PortStatus", "PortThreshold", "Other", "All", and "None". Multiple categories
can be specified, separated by commas.
FcCategories
The Virtual Connect Fibre Channel trap categories to send to the destination. Valid
values are "PortStatus", "Other", "All", and "None". Multiple categories can be
specified, separated by commas.
Examples
->add snmp-trap EnetManagementStation Address=192.112.34.10
Community=private Format=SNMPv1 Severity=Normal,Critical
EnetCategories=Other
Adds a new trap destination for VC-Enet modules
->add snmp-trap FcManagementStation Address=192.112.72.3
Community=private Format=SNMPv1 FcCategories=Other
Adds a new trap destination for VC-FC modules
->add snmp-trap MyTrap Address=192.112.66.12
Adds a new trap using typical defaults
->add snmp-trap MyTrap Address=192.112.42.5 Severity=All
FcCategories=All DomainCategories=All
Adds a trap with all severity and category properties set. Severities are allowed
even though FC categories are set, but the severities are applied to the domain
categories.
Item Description
remove snmp-trap
Removes a previously configured SNMP trap destination.
Syntax
remove snmp-trap <Name|*>
Parameter
Name (required)
The name of the trap destination to be removed. Use "*" to remove all traps.
Examples
->remove snmp-trap MyTrap1
Removes an SNMP trap destination