HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 4.01 User Guide

Command line 148
Name RFC Description
numRxClass1Frames
FCMGMT
-MIB
The number Class 1 frames received at this port. This statistic is for Fibre
Channel only. The object type is
connUnitPortStatCountClass1RxFrames.
numRxClass2Frames
FCMGMT
-MIB
The number of Class 2 frames received at this port. The object type is
connUnitPortStatCountClass2RxFrames.
numRxClass3Frames
FCMGMT
-MIB
The number of Class 3 frames received at this port. The object type is
connUnitPortStatCountClass3RxFrames.
numRxLCs
N/A The number of link control frames received at this port
numRxOfflineSequences
FCMGMT
-MIB
The number of Offline Primitive OLSs received at this port. The object
type is connUnitPortStatCountRxOfflineSequences.
rxBytePeakRate
N/A The receive max byte rate since the last reset (bytes/s)
rxByteRate
N/A The receive instantaneous byte rate (bytes/s)
rxFramePeakRate
N/A The receive max frame rate since the last reset (frames/s)
rxFrameRate
N/A The receive instantaneous frame rate (frames/s)
samplingRate
N/A This controls the rate of statistics sampling in switch ports. Polling must
be frequent enough to avoid counter overflow for errors and tx/rx
bytes.
sfpStatus
N/A The SFP status
txBytePeakRate
N/A The transmission max byte rate since the last reset (bytes/s)
txByteRate
N/A The receive instantaneous byte rate (bytes/s)
txFramePeakRate
N/A The transmission max frame rate since the last reset (frames/s)
txFrameRate
N/A The transmission instantaneous frame rate (frames/s)
VC 4Gb/8Gb 20-port FC module uplink and downlink ports
Statistics are not currently available for uplink or downlink ports.
Fibre Channel modules
ADDRESSERRORS
Object type
connUnitPortStatCountAddressErrors
Description
The number of frames received with unknown addresses, such as an unknown SID or
DID. The SID or DID is not known to the routing algorithm.
::= { connUnitPortStatEntry 48 }
BBCREDITZERO
Object type
connUnitPortStatCountBBCreditZero
Description
The number of transitions in or out of the BBcredit zero state. The other side does not
provide any credit.
::= { connUnitPortStatEntry 8 }
BYTESRECEIVED
Object type
connUnitPortStatCountRxElements
Description
The number of octets or bytes received by this port in 1-second periodic polling of the
port. This value is saved and compared with the next polled value to compute the net
throughput. For Fibre Channel, ordered sets are not included in the count.