HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 4.01 User Guide

Configuring the Virtual Connect domain using the CLI 156
Up to 32 local user accounts can be created.
Each user account can be set up to have a combination of up to four access roles:
• Domain
o Define local user accounts, set passwords, define roles
o Configure role-based user authentication
o Import enclosures
o Name the VC domain
o Set the domain IP address
o Update firmware
o Administer SSL certificates
o Delete the VC domain
o Save configuration to disk
o Restore the configuration from a backup
o Configure SNMP settings
• Network
o Configure network default settings
o Select the MAC address range to be used by the VC domain
o Create, delete, and edit networks
o Create, delete, and edit shared uplink sets
o Create, delete, and edit network access groups
o Configure Ethernet SNMP settings
• Server
o Create, delete, and edit server Virtual Connect profiles
o Assign and unassign profiles to device bays
o Select and use available networks
o Select serial numbers and UUIDs to be used by server profiles
o Power on and off server blades within the enclosure
• Storage
o Select the WWNs to be used by the domain
o Set up the connections to the external FC Fabrics
o Configure FC SNMP settings
Additional operation permissions can be assigned to network, server, or storage roles such as configuring
port monitoring or upgrading VC firmware.
It is possible to create a user with no roles. This user can only view status and settings.
Configuring LDAP authentication support for users
To set LDAP properties:
>set ldap serveraddress=192.168.0.110 enabled=true