HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 4.01 User Guide

Command line 33
Item Description
->set enet-connection RedProfile 1 Network=""
Sets a network connection to "Unassigned"
->set enet-connection GreenProfile 3 PXE=disabled
Disables PXE on an Ethernet connection
->set enet-connection MyProfile 1 SpeedType=Preferred
Modifies the Ethernet network connection to set the speed to "Preferred"
->set enet-connection MyProfile 1 SpeedType=Custom
Speed=2000
Modifies the Ethernet network connection to set the speed to 2Gb
->set enet-connection RedProfile 1
McastFilter="MyFilter"
Sets a Multicast Filter.
Item Description
show enet-connection
Display the Ethernet connections associated with the server profiles.
Syntax
show enet-connection [<ConnectionID>]
Parameter
ConnectionID (optional)
The ID of an existing Ethernet connection. The ID format is
<ProfileName:Port>. Use <ProfileName:*> to display all profile
Ethernet connections. Use "*" to display all connections in the domain.
Examples
->show enet-connection *
Displays all Ethernet connections in the domain
->show enet-connection Profile1:*
Displays all Ethernet connections of a profile named Profile1
->show enet-connection Profile1:1
Displays a specific Ethernet connection of a profile named Profile1
enet-vlan
Manage Ethernet VLAN configuration settings.
Supported actions: help, set, show
Item Description
set enet-vlan
Modify general Ethernet VLAN configuration settings.
Syntax
set enet-vlan [-quiet][SharedServerVLanId=<true|false>]
[PrefSpeedType=<Auto|Custom>] [PrefSpeed=<speed>]
[MaxSpeedType=<Unrestricted|Custom>] [MaxSpeed=<speed>]
[VlanCapacity=<Legacy|Expanded>]
Option
quiet
This option suppresses user confirmation prompt, and is typically used in
automated scripting scenarios.
Properties
SharedServerVLanId
(optional)
Enables or disables the option to force server ports connected to multiple VC
Ethernet networks to use the same VLAN mappings as those used by
corresponding shared uplink sets. Valid values are "true" and "false".
Setting the value to "true" restricts the
server network connections to be selected
from a single shared uplink, and the VLAN ID cannot be modified.
Setting the value to "false" enables you to select any VC Ethernet network for the