HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 4.01 User Guide

Command line 44
Item Description
NodeWWN=50:06:0B:00:00:C2:62:01
Adds a new FCoE connection and provides user-defined WWN addresses
->add fcoe-connection MyNewProfile
MACAddressType=Factory-Default
Adds a new FCoE connection and uses factory-default MAC addresses
->add fcoe-connection MyNewProfile
MACAddressType=User-Defined
EthernetMAC=00-17-A4-77-00-00
Adds a new FCoE connection and provides a user-defined MAC address
->add fcoe-connection MyProfile Fabric=MyFabric
SpeedType=Preferred
Adds a new FCoE connection and sets the speed type to "Preferred"
->add fcoe-connection MyProfile Fabric=MyFabric
SpeedType=Preferred
Adds a new FCoE connection and set the speed type "Preferred"
Item Description
remove fcoe-connection
Remove the last FCoE connection from an existing server profile.
Syntax
remove fcoe-connection <ProfileName>
Parameter
ProfileName (required)
The name of an existing profile from which the last FCoE connection is being
removed
Example
->remove fcoe-connection MyProfile
Removes an FCoE connection from a profile
Item Description
set fcoe-connection
Modify an existing FCoE connection.
Syntax
set fcoe-connection <ConnectionID>
[Fabric=<FabricName>|FcoeNetwork=<FcoeNetName>]
[SpeedType=<1Gb|2Gb|4Gb|8Gb|Auto|Custom|Preferred|Disabl
ed>] [CustomSpeed=<100Mb-
10Gb>] [BootPriority=<priority>]
[BootPort=<portName>] [BootLun=<LUN>]
Parameters
ConnectionID
(required)
The ID of an existing FCoE connection. The format of the ID must be
<ProfileName:Port>
.
Properties
Fabric (optional)
The name of the fabric to associate with the connection. The fabric being
specified should be associated with the same bay as the FCoE connection.
FcoeNetwork (optional)
The name of the FCoE network to associate with the connection. You cannot
specify both Fabric and FcoeNetwork properties.
SpeedType (optional)
The requested operational speed for the server. Valid values include
"1Gb","2Gb", "4Gb", "8Gb", "Auto", "Custom", "Preferred", and
"Disabled". "Auto" does not apply to fabrics and "1Gb" to "8Gb" do not apply
to FCoE networks.
If the SpeedType is "Custom", you can configure a speed from 100Mb to 10Gb
in 100Mb increments.
If the speed type is "Preferred", the speed of the FCoE connection is the same as
the preferred speed of the fabric or FCoE network to which the connection is
associated. If no preferred speed is configured for a fabric or FCoE network, VC
determines the speed".