HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 4.01 User Guide

Command line 47
Item Description
show igmp
Display Ethernet IGMP Snooping settings.
Syntax
show igmp
Example
->show igmp
Displays IGMP Snooping settings
igmp-group
Display interconnect module IGMP Group table information.
Supported actions: help, show
Item Description
show igmp-group
Display interconnect module IGMP Group table information for the specified module.
Syntax
show igmp-group <ModuleID>
Parameter
ModuleID
(required)
The ID of the module for which to display the IGMP Group table. The ID is in the format
of
<EnclosureID>:<BayNumber>
.
Example
->show igmp-group enc0:1
Displays the IGMP Group information for the module in bay 1 of enclosure enc0
interconnect
Manage I/O interconnect modules.
Supported actions: help, set, show
Item Description
set interconnect
Modify the interconnect module host name setting.
Syntax
set interconnect [-quiet] [<EnclosureID>:<BayNumber>]
[<Hostname=new_hostname>]
Option
quiet
Suppresses user confirmation prompts. This option is useful when scripting
operations.
Properties
EnclosureID
The ID of the enclosure
BayNumber
The Virtual Connect IO bay number
Hostname
A string of characters that cannot be longer than 63 characters and must begin
with an uppercase or lowercase alphabetic character. If the hostname parameter
is set to "DEFAULT", the host name is set to the default VC host name.
Host names beginning with "VCE" are reserved.
Examples
->set interconnect enc0:1 Hostname="DevelopmentNetworks"
Sets the host name of interconnect bay 1 in enclosure enc0 to
DevelopmentNetworks
->set interconnect enc0:2 Hostname="DEFAULT"
Resets the host name of interconnect bay 2 in enclosure enc0 to the factory
default