HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 4.01 User Guide

Command line 70
Item Description
Examples
->show nag-network
Displays a summary of all network to network access group associations in the domain
->show nag-network *
Displays detailed information for all network to network access group associations in
the domain
->show nag-network DatabaseNetGroup:Net1
Displays detailed information about the association between a specified network
access group and a specified network
name-server
Display a snapshot of all hosts and direct attached storage devices for the specified FlexFabric module.
Supported actions: help, show
Item Description
show name-server
Display a snapshot of all hosts and direct attached storage devices for the specified
FlexFabric module.
Syntax
show name-server <ModuleID>
Parameter
ModuleID
(required)
The ID of the module for which to display the name server information. The module must
be a FlexFabric module. The ID is in the format of
<EnclosureID>:<BayNumber>
.
Example
->show name-server enc0:1
Displays the name server information for the module in bay 1 of enclosure enc0
network
Manage Virtual Connect Ethernet networks.
Supported actions: add, help, remove, set, show
Item Description
add network
Create a new Ethernet or FCoE network. An FCoE network is associated to an uplink
port set. After the network is created, uplink ports can be added if the network is not
using a shared uplink set.
The SmartLink property is no longer supported during the creation of the network. If
specified, it is ignored. To configure the SmartLink attribute, use the set network
command.
If the QoS type is set to "CustomNoFcoe", a "cannot add fabric when QoS
configuration type is CustomNoFCoE" error message appears. For more information
about setting the QoS type, see "qos (on page 86)."
Syntax
add network <NetworkName> [-quiet][-fcoe]
[Nags=<nagName>[,<nagName2>,...]] [UplinkSet=<UplinkSetName>
VLanID=<VLanID>] [State=<Enabled|Disabled>]
[NativeVLAN=<Enabled|Disabled>] [Private=<Enabled|Disabled>]
[ConnectionMode=<Auto|Failover>]
[VLanTunnel=<Enabled|Disabled>] [PrefSpeedType=<Auto|Custom>]
[PrefSpeed=<100Mb–10Gb in 100Mb increments]
[MaxSpeedType=<UnRestricted|Custom>] [MaxSpeed=<100Mb–
10Gb in
100Mb increments>]