HP Virtual Connect for the Cisco Network Administrator

HP Virtual Connect for Cisco Network Administrators (version 4.x)
Document Number: C01386629 Date: January 2014
page 32
Figure 17: Dual-Hop FCOE configuration
Figure 17 “Sample” Cisco Nexus Switch Configurations
Nexus switch-A configuration
Upgrade the first Nexus switch with minimum System version 5.2(1)N1(3) (enter: show version)
Enable FCoE on the switch (disabled by default):
 configure terminal
 feature fcoe
 feature lacp
Note: The Nexus will require a reload.
Associate a VLAN with a VSAN for FCoE traffic:
 vlan 200
 fcoe vsan 200
Create a port channel with eth1/5 and eth1/6 with the same LACP Timer as defined by default in the Virtual
Connect Domain, eth1/5 and eth1/6 can be used because both are mapped to the same UPC (i.e. UPC#1) on
Nexus:
 interface Ethernet1/5