HP Virtual Connect Manager Command Line Interface Version 3.00 User for Integrity BL8x0c i2 Server Blades Guide
Configuring the Virtual Connect domain using the CLI 100
• Modify an existing user
>set user bob fullname="Bob J Smith" enabled=false
• Remove an existing user
>remove user bob
• Remove all local users except for the Administrator account
>remove user *
Display local users:
• Summary display
>show user
• Detailed display
>show user *
• Display info on a single user
>show user steve
Up to 32 local user accounts can be created.
Each account can be set up to have a combination of up to four access privileges:
• Domain
o Define local user accounts, set passwords, define roles
o Import enclosures
o Name the VC domain
o Set the domain IP address
o Update firmware
o Administer SSL certificates
o Delete the VC domain
o Save configuration to disk
o Restore the configuration from a backup
o Configure SNMP settings
• Networking
o Configure network default settings
o Select the MAC address range to be used by the VC domain
o Create, delete, and edit networks
o Create, delete, and edit shared uplink sets
o Configure Ethernet SNMP settings
• Server
o Create, delete, and edit server Virtual Connect profiles
o Assign and unassign profiles to device bays
o Select and use available networks
o Select serial numbers (logical) and UUIDs (logical) to be used by server profiles
o Power on and off server blades within the enclosure
• Storage