HP Virtual Connect Manager Command Line Interface Version 3.00 User for Integrity BL8x0c i2 Server Blades Guide

Configuring the Virtual Connect domain using the CLI 111
Common management operations
The following table provides the syntax for the most commonly used management operations.
For detailed information on a particular command, see "Managed elements (on page 13)."
Operation Examples
Display general domain settings
>show domain
Display predefined address pools
>show domain addresspool
Display interconnect modules
•
Summary display
>show interconnect
•
Detailed display
>show interconnect *
•
Single module display
>show interconnect enc0:2
Display overall domain status
>show status
Display stacking link configuration and status
>show stackinglink
Display the system log
>show systemlog
Display a list of servers in the domain
•
Summary display
>show server
•
Detailed display
>show server *
•
Single server display
>show server enc0:1
Display server profiles
•
Summary display
>show profile
•
Detailed display
>show profile *
•
Single profile display
>show profile MyProfile
Delete the domain configuration
>delete domain
Force a failover to the standby VC Manager
>reset vcm - failover
Power off server blades
>poweroff server enc0:2
>poweroff server *
Power on server blades
>poweron server enc0:1
>poweron server *
Reset a server blade
>reboot server enc0:4
>reboot server *
Unassign a server profile from a device bay
>unassign profile MyProfile
Modify Ethernet network connection
properties
>set enet-connection MyProfile 1
pxe=disabled
Modify FC fabric connections
>set fc-connection MyProfile 2 speed=auto
Resetting the Virtual Connect Manager
To reset the Virtual Connect Manager, use the reset vcm command: