HP Virtual Connect Manager Command Line Interface Version 3.00 User for Integrity BL8x0c i2 Server Blades Guide

Command line 14
Managed element Description
firmware
(on page 31)
Manage interconnect module firmware
igmp
(on page 32)
Manage Ethernet IGMP Snooping settings
interconnect
(on page 32)
Manage I/O interconnect modules
ldap
(on page 33)
Manage LDAP configuration settings
ldap-certificate
(on page 35)
Manage LDAP certificate information
ldap-group
(on page 36)
Manage LDAP group configuration settings
log-target
(on page 37)
Manage remote log destination settings
mac-cache
(on page 40)
Manage Ethernet MAC cache failover settings
network
(on page 40)
Manage Virtual Connect Ethernet networks
port-monitor
(on page 44)
Monitor port monitor configurations
profile
(on page 46)
Manage Virtual Connect server profiles
server (on page 49) Manage physical HP BladeSystem servers
serverid
(on page 52)
Manage virtual server ID configuration settings
server-port
(on page 53)
Display all physical server ports
server-port-map
(on page 54)
Manage shared server downlink port mapping configuration
snmp
(on page 56)
Modify SNMP configurations
snmp-trap
(on page 57)
Modify SNMP-trap configurations
ssh
(on page 60)
Display SSL configuration and information
ssl-certificate
(on page 61)
Manage SSL certificate information
ssl-csr
(on page 62)
Manage an SSL certificate signing request
ssl
(on page 61)
Manage weak SSL encryption
stackinglink
(on page 63)
Display stacking link information and status
statistics (on page 63) Display or reset statistics on a designated interconnect
module port
status
(on page 64)
Display overall Virtual Connect domain status information
supportinfo
(on page 64)
Manage Virtual Connect support information
systemlog
(on page 64)
Display Virtual Connect Manager system event log
uplinkport
(on page 65)
Manage interconnect module uplink ports
uplinkset
(on page 68)
Manage shared uplink port sets
user (on page 69)
Manage local Virtual Connect user configurations
user-security
(on page 71)
Manage user security settings
vcm (on page 72)
Manage the Virtual Connect domain manager
version
(on page 73)
Display CLI version information
The following sections provide detailed information on how the subcommands are used with each
managed element.
To display command help, enter a command followed by ? or -help. For additional information on the
help subcommand, see "Help subsystem (on page 73)."