HP Virtual Connect Manager Command Line Interface Version 3.00 User for Integrity BL8x0c i2 Server Blades Guide

Command line 18
Item Description
->set domain MacType=User-Defined MacStart=00-17-A4-77-
00-00 MacEnd=00-17-A4-77-00-FF
Sets the MAC address source to a custom, user-defined address range
->set domain WwnType=VC-Defined WwnPool=5
Sets the WWN address source to VC-Defined with a pre-defined range
->set domain WwnType=Factory-Default
Sets the WWN address source to use factory default WWN addresses
->set domain WwnType=User-Defined
WwnStart=50:06:0B:00:00:C2:62:00
WwnEnd=50:06:0B:00:00:C2:62:FF
Sets the WWN address source to a custom, user-defined address range
->set domain SingleDense=true
Sets the display option to support single-dense servers in a double-dense
supported configuration
Item Description
show domain
Display general Virtual Connect domain information, including the Virtual
Connect domain name, the VCM domain IP address settings, and MAC/WWN
address settings for the domain.
Syntax
show domain [addressPool]
Parameter
addressPool
(Optional)
Displays all the VC-defined address pool range available for use
Examples
->show domain
Displays domain information
->show domain addressPool
Displays the VC-defined address pools for the domain
enclosure
Manage general enclosure settings and information.
Supported actions: help, import, remove, show
Item Description
import enclosure
Import local and remote enclosures into the Virtual Connect domain. Virtual
Connect supports up to four c7000 enclosures in a single domain.
Syntax
import enclosure [IpAddress] [UserName=<username>]
[Password=<password>] [DoubleDense=<True|False>]
For enclosures that are not imported, the password field is optional on the
command line. If not specified on the command line, the system interactively
prompts the user for the same password.
Parameter
IpAddress (Optional)
The IP address or DNS name of the remote enclosure to be imported. If the IP
address is not given, then the local enclosure is assumed.
Properties