HP Virtual Connect Manager Command Line Interface Version 3.00 User for Integrity BL8x0c i2 Server Blades Guide

Command line 31
Item Description
BootPort (optional)
The target WWPN of the controller interface on the Fibre Channel storage
target. The port name is a 64-bit identifier in the format
NN:NN:NN:NN:NN:NN:NN:NN, where N is a hexadecimal number.
BootLun (optional)
The LUN of the volume used for SAN boot. Valid values include an integer
from 0 to 255 or 16 hex digits (HP-UX only).
Examples
->set fc-connection MyProfile 1 Fabric=SAN_5
Changes the fabric of an FC SAN fabric connection
->set fc-connection RedProfile 2 Fabric=""
Sets a FC SAN fabric connection to "Unassigned"
->set fc-connection BlueProfile 1 Fabric=SAN_7
Changes the FC SAN fabric of an FC SAN connection
->set fc-connection BlueProfile 1 Speed=4Gb
Changes the port speed of an FC SAN connection
->set fc-connection BlueProfile 1 BootPriority=Primary
BootPort=50:06:0B:00:00:C2:62:00 BootLun=5
Changes the SAN boot priority and sets additional boot parameters
Item Description
show fc-connection
Display the FC SAN connections associated with the server profiles.
Syntax
show fc-connection [<ConnectionID>]
Parameter
ConnectionID
(optional)
The ID of an existing FC SAN connection. The ID format is
<ProfileName:Port>. <ProfileName:*> can be used to display all the FC
SAN connections of a profile. '*' displays all the FC SAN connections
existing in the domain.
Examples
->show fc-connection
Displays all FC SAN connections existing in the domain
->show fc-connection Profile1:*
Displays FC SAN connections of profile Profile1
->show fc-connection Profile1:1
Displays a specific FC SAN connection of profile Profile1
firmware
Display the Virtual Connection firmware version.
Support actions: help, show
show firmware
Display the firmware information for all interconnect modules in the domain.
Syntax
show firmware