HP Virtual Connect Manager Command Line Interface Version 3.00 User for Integrity BL8x0c i2 Server Blades Guide

Command line 40
Item Description
Example
->test log-target
Sends a test message all log-targets
mac-cache
Manage Ethernet MAC Cache failover settings.
Supported actions: help, set, show
Item Description
set mac-cache
Modify Ethernet MAC Cache failover settings.
Syntax
set mac-cache [Enabled=<true|false>] [Refresh=<interval>]
Properties
Enabled
(optional)
Enables or disables MAC cache failover. Valid values include "true" and "false".
Refresh
(optional)
The refresh interval for the MAC Cache (in seconds). Valid values include integers
from 1-30. The default refresh interval is 5 seconds.
Examples
->set mac-cache Enabled=true
Enables MAC Cache Failover
->set mac-cache Enabled=true Refresh=10
Enables MAC Cache Failover and sets the refresh interval
Item Description
show mac-cache
Display Ethernet MAC Cache failover settings.
Syntax
show mac-cache
Example
->show mac-cache
Displays Ethernet MAC Cache failover settings
network
Manage Virtual Connect Ethernet networks.
Supported actions: add, help, remove, set, show
Item Description
add network
Create a new Ethernet Network. After the network has been created, uplink ports
can be added if the network is not using a shared uplink port set.
The SmartLink property is no longer supported during the creation of the network. If
specified, it will be ignored. To configure the SmartLink attribute, use the set
network
command.
Syntax
add network <NetworkName> [-quiet]
[UplinkSet=<UplinkSetName> VLanID=<VLanID>]
[State=<Enabled|Disabled>] [NativeVLAN=<Enabled|Disabled>]
[Private=<Enabled|Disabled>]