HP Virtual Connect Manager Command Line Interface Version 3.00 User for Integrity BL8x0c i2 Server Blades Guide

Command line 42
Item Description
->add network Network1 Private=Enabled
Configures a private network when adding a new network
->add network Network1 UplinkSet=Uplinkset1 VLANID=100
NativeVLAN=Enabled
Creates a new network with a shared uplinkset and tags it as Native VLAN
->add network Network1 ConnectionMode=Failover
Creates a new network and sets the connection mode as failover
->add network Network1 VLanTunnel=Enabled
Creates a new network and enables VLAN tunneling
->add network Network1 PrefSpeedType=Custom PrefSpeed=4000
MaxSpeedType=Custom MaxSpeed=6000
Creates a new network with a preferred connection speed of 4Gb and maximum
connection speed of 6Gb
Item Description
remove network
Remove a network from the domain. To remove a network, it must not be in use by
any server profiles.
Syntax
remove network <NetworkName | *>
Parameter
NetworkName
(required)
The name of an existing network in the domain. A network name of "*" removes all
networks.
Examples
->remove network MyNetwork
Removes a network
->remove network *
Removes all networks
Item Description
set network
Modify an existing Ethernet network.
Syntax
set network <NetworkName> [-quiet] [Name=<NewName>]
[State=<Enabled|Disabled>]
[SmartLink=<Enabled|Disabled>][NativeVLAN=<Enabled|Disabled>
] [Private=<Enabled|Disabled>] [VlanId=<New VLanId>]
[ConnectionMode=<Auto|Failover>]
[VLanTunnel=<Enabled|Disabled>]
[PrefSpeedType=<Auto|Custom>] [PrefSpeed=<100Mb–10Gb in
100Mb increments>] [MaxSpeedType=<UnRestricted|Custom>]
[MaxSpeed=<100Mb–10Gb in 100Mb increments>]
Parameter
NetworkName
(required)
The name of an existing network to modify
Option
Quiet (optional)
Suppresses user confirmation prompts during network creation and modification.
This option is used mainly in automated scripting scenarios.
Properties
Name (optional)
The new name of the network
State (optional)
Enables or disables the network. Valid values are "Enabled" and "Disabled".