HP Virtual Connect Manager Command Line Interface Version 3.00 User for Integrity BL8x0c i2 Server Blades Guide

Command line 47
Item Description
assigned to a device bay using the "assign" subcommand.
Syntax
add profile <ProfileName> [-NoDefaultEnetConn] [-
NoDefaultFcConn] [-NoDefaultFcoeConn] [SNType=<Factory-
Default|User-Defined>] [SerialNumber=<serialnumber>]
[UUID=<uuid>]
Parameter
ProfileName
The unique name of the new server profile to create
Options
NoDefaultEnetConn
Do not add default Ethernet Network connections when creating the server
profile.
NoDefaultFcConn
Do not add default FC SAN connections when creating the server profile.
NoDefaultFcoeConn
Do not add default FCoE SAN connections when creating the server profile.
Properties
SNType (Optional)
The source of the serial number assignment to be used during the profile
creation. If not specified, the serial number is assigned according to the Virtual
connect default domain settings. Valid values include "Factory-Default" and
"User-Defined".
SerialNumber
(required if the
SNType is User-
Defined)
A custom user-defined serial number associated with the server profile. When
the profile is assigned to a device bay that contains a server, the server inherits
the virtual serial number. The user-defined serial number must start with the
pattern VCX01.
UUID (Optional)
A unique 128-bit identifier for the virtual server ID. The format is xxxxxxxx-xxxx-
xxxx-xxxx-xxxxxxxxxxxx, where x is any alpha-numeric character. If no UUID is
specified, then one is auto-generated. The UUID can be specified only if the
SNType is User-Defined.
Examples
->add profile MyNewProfile
Creates a new profile and adds it to the domain, using default connections and
Virtual Connect default serial numbers
->add profile MyNewProfile2 -NoDefaultEnetConn
Creates a new profile without adding default Ethernet connections
->add profile MyNewProfile2 -NoDefaultFcConn
Creates a new profile without adding default FC connections
->add profile MyNewProfile2 -NoDefaultFcoeConn
Creates a new profile without adding default FCoE connections
->add profile MyNewProfile2 -NoDefaultEnetConn
-NoDefaultFcConn
Creates a new profile without adding default Ethernet and FC connections
->add profile MyNewProfile2 -NoDefaultEnetConn
-NoDefaultFcConn -NoDefaultFcoeConn
Creates a new profile without adding default Ethernet, FC, and FCoE
connections
->add profile MyNewProfile SNType=User-Defined
SerialNumber=VCX0113121
Creates a new profile and specifies a custom virtual serial number
->add profile MyNewProfile SNType=Factory-Default
Creates a new profile and uses the factory assigned serial number