HP Virtual Connect Manager Command Line Interface Version 3.00 User for Integrity BL8x0c i2 Server Blades Guide

Command line 58
Item Description
For VC-FC modules, the maximum string length is 24.
Format
Format of the new trap. Valid values are "SNMPv1" and "SNMPv2". The
default is "SNMPv1" if not specified.
Severities
Trap severities to send to the destination. Valid values are "Normal",
"Unknown", "Info", "Warning", "Minor", "Major", "Critical", "All", and
"None".
Multiple severities can be provided, separated by commas. The default severity
is "None".
DomainCategories
The Virtual Connect Domain trap categories to send to the destination. Valid
values are "Legacy", "DomainStatus", "NetworkStatus", "FabricStatus",
"ProfileStatus", "ServerStatus", "EnetStatus", FcStatus", "All", and "None".
Multiple categories can be specified, separated by commas.
EnetCategories
The Virtual Connect Ethernet trap categories to send to the destination. Valid
values are "PortStatus", "PortThreshold", "Other", "All", and "None".
Multiple categories can be specified, separated by commas.
FcCategories
The Virtual Connect Fibre Channel trap categories to send to the destination.
Valid values are "PortStatus", "Other", "All", and "None".
Multiple categories can be specified, separated by commas.
Examples
->add snmp-trap EnetManagementStation
Address=192.112.34.10 Community=private Format=SNMPv1
Severity=Normal,Critical EnetCategories=Other
Adds a new trap destination for VC-Enet modules
->add snmp-trap FcManagementStation Address=192.112.72.3
Community=private Format=SNMPv1 FcCategories=Other
Adds a new trap destination for VC-FC modules
->add snmp-trap MyTrap Address=192.112.66.12
Adds a new trap using typical defaults
->add snmp-trap MyTrap Address=192.112.42.5 Severity=All
FcCategories=All DomainCategories=All
Adds a trap with all severity and category properties set. Severities are allowed
even though FC Categories are set; the severities will be applied to the Domain
Categories.
Item Description
remove snmp-trap
Removes a previously configured SNMP trap destination
Syntax
remove snmp-trap <Name | *>
Parameter
Name (required)
The name of the trap destination to be removed. If "*" is specified, then all
traps are removed.
Examples
->remove snmp-trap MyTrap1
Removes an SNMP trap destination
->remove snmp-trap *
Removes all configured SNMP trap destinations