HP Virtual Connect Manager Command Line Interface Version 3.00 User for Integrity BL8x0c i2 Server Blades Guide

Command line 90
Name RFC Description
Errors of times that the SQE TEST ERROR
message is generated by the PLS
sublayer for a particular interface.
The SQE TEST ERROR is set in
accordance with the rules for
verification of the SQE detection
mechanism in the PLS Carrier
Sense Function as described in
IEEE Std. 802.3, 1998 Edition,
section 7.2.4.6. This counter does
not increment on interfaces
operating at speeds greater than
10 Mb/s, or on interfaces
operating in full-duplex mode.
Discontinuities in the value of this
counter can occur at re-
initialization of the management
system, and at other times as
indicated by the value of
ifCounterDiscontinuityTime.
rfc2665_Dot3StatsSingleColl
isionFrames
2665
A count of successfully transmitted
frames on a particular interface
for which transmission is inhibited
by exactly one collision. A frame
that is counted by an instance of
this object is also counted by the
corresponding instance of either
the ifOutUcastPkts,
ifOutMulticastPkts, or
ifOutBroadcastPkts, and is not
counted by the corresponding
instance of the
dot3StatsMultipleCollisionFrames
object. This counter does not
increment when the interface is
operating in full-duplex mode.
Discontinuities in the value of this
counter can occur at re-
initialization of the management
system, and at other times as
indicated by the value of
ifCounterDiscontinuityTime.
rfc2665_Dot3StatsSymbolErr
ors
2665
For an interface operating at 100
Mb/s, the number of times there
was an invalid data symbol when
a valid carrier was present.
For an interface operating in half-
duplex mode at 1000 Mb/s, the
number of times the receiving
media is non-idle (a carrier event)
for a period of time equal to or
greater than slotTime, and during
which there was at least one