ColorSpan Legacy Print Server - Release Notes

- 4 -
ColorSpan Print Server Software 8.9x Release Notes
Update from Versions
8.95-8.97c
To update the software from version 8.95, 8.96, 8.97, 8.97a, 8.97b, or 8.97c, you will need:
◆ ColorSpan Print Server Software Version 8.98 CD-ROM
Note
The update software requires that your server be running 8.95 software or
above. It cannot be used with any version of the floppy-disk based installation
procedure for older ColorSpan Print Servers.
1. If the ColorSpan server is not running, power on the server.
The server boots. When it has finished its startup sequence, the System Control inter-
face appears on the screen.
2. Wait until all jobs are done spooling, RIPing, and printing.
3. Load the ColorSpan Print Server version 8.98 CD-ROM into its drive on the print
server.
4. From the System menu, select Update...
This starts the installation process. Follow the prompts to install the software.
5. When prompted after the installation process is complete, remove the CD-ROM
from its drive.
The System Control interface reappears.
Technical Support For service and support, contact MacDermid ColorSpan Technical Services:
◆ World Wide Web: www.colorspan.com
◆ Internet E-mail: [e-mail]
United States and Canada:
◆ Telephone: [phone] or [phone]
◆ Fax: [phone] or [phone]
Latin America:
◆ Telephone: [phone] or [phone]
◆ Fax: [phone]
Europe/Middle East/Africa:
◆ Telephone: [phone]
◆ Fax: [phone]
Asia/Pacific:
◆ Telephone: [phone]
◆ Fax: [phone]
◆ Telephone (South Korea): [phone]