DisplayMaker Legacy ColorMark+ - User Guide

Creating Profiles 2-7
11. Check the Skip Camera checkbox if you do not want to
print and read the onboard device linearization target.
If you choose Skip Camera, linearization will finish faster,
but you will not be able to Calibrate the profile with the
onboard device.
12. Check the Skip Printing check box if you want to skip
printing the linearization targets and use previously-
printed onboard and external device targets, or files with
onboard and external device density data.
If you check Skip Printing, enter the number of lineariza-
tion patches per row on the onboard and external device tar-
gets, or any number if you are reading onboard and external
device data files.
13. Click OK to continue.
The printer prints and reads the camera linearization target
(unless Skip Camera or Skip Printing was selected). The
Camera Input window displays. Alternatively, you can input
camera linearization data by selecting File - Open from the
menu.
14. Click the Accept Readings button to accept the camera
data.
15. Click Initialize Device, or open a file.
The external device reads the linearization target, unless you
chose Skip Printing or there is no external device detected.
After the target (or file) has been read by the external device,
the software prompts you to click Accept Readings.
16. Click the Accept Readings button. The software displays
this message:
Linearization done. Click ‘Next’ button for targeting.
Fig. 2-5. Camera or external device input buttons
Accept Readings
Open File
Save File
Insert strip
Initialize Device
Delete strip
Help