HP RIP Software - HP RIP Software User Guide

1-8 Installation
Note If Windows displays the message, “The software you are
installing for this hardware has not passed Windows Logo
testing to verify its compatibility with Windows,” click the
Continue Anyway button. The software has been thor-
oughly tested with all supported Windows operating sys-
tems.
13. Un-bind protocols from the office network card.
Uncheck the VideoNet protocol from this card by clicking once on
the check box. Use the identifying information in this tab to verify
that you are configuring your office LAN settings, not the VideoNet
card settings.
14. Click OK to close the window.
15. Right-click the VideoNet connection icon, then click Properties.
The window should now display all services and protocols assigned
to the VideoNet card.
16. Uncheck all protocols except VideoNet by clicking on the boxes
with check marks in them.
Step 4: Enable the Web
Server (Windows Vista)
IIS is a Microsoft Windows component that allows your computer to
serve HTML pages to a web browser. The RIP user interface is dis-
played using IIS and a web browser.
To enable the Microsoft Internet Information Services (IIS) in Windows
Vista:
1. Disable User Account Control (UAC).
a. Click Control Panels > User Accounts > Turn User Account
Control On/Off
b. Uncheck the checkbox “Use User Account Control (UAC) to
help protect your computer.”
c. Click OK and restart the computer.
2. Click the Start button > Control Panel > Programs > Turn Win-
dows features on or off.
3. Check the Internet Information Services checkbox.
4. Under Web Management Tools, check the IIS 6 Management
Compatibility checkbox.
5. Click OK.
VISTA