HP RIP Software - HP RIP Software User Guide

Working with Queues 2-13
• Step-and-Repeat — prints rows of an image across the width of
the media. Specify the space between images in a row in the Gut-
ter Width field. Specify the percentage of the image width to offset
the image copies in the Offset Percent field. Specify the length of
media to print in the Step-and-Repeat Length field.
• Create Media Saver — creates a Media Saver job from the cur-
rent job (Output and RIP Saver queues only). See “Creating a
Media Saver Job” on page 2-18 for more information about Media
Saver.
6. To save your changes, click the Submit ( ) button.
Crop/Size
This tab enables you to manipulate the image before or after it is RIPed.
It has three subtabs:
• Cropping
• Tiling & Scaling
• Options
To use the Crop/Resize options:
1. Set the “Default sizing method for downloaded images” for an input
port to “Manual.”
Single-page PDF and PostScript files should be sent through an
input port with “Default sizing method for downloaded images” set
to “Unscaled.” (For instructions, see “Setting Port Properties” on
page 3-7.) Multi-page files cannot be scaled.
2. Download a supported file type (single-page EPS, PDF, PostScript;
TIFF, JPEG) to the RIP port you configured.
The job is routed to the Input Hold Queue.
3. Open the Input Hold queue.
4. Click the Crop/Size tab.