HP RIP Software - HP RIP Software User Guide

Configuring the Printer 3-15
This tab shows the printer’s current status (for example, Ready or Print-
ing), the ink type installed, and the percentage and amount of remaining
ink reported by the profiler for each color.
To update the printer’s embedded software from this tab, see “Updating
the Printer Software” on page 1-28.
Configure
This tab displays printer embedded software version information, and
allows you to specify the media type and ink options.
• Media loaded — current media type installed on the printer
• Last calibrated — the date when the printer was last calibrated
(linearized).
• Pause on low ink — defines the percentage of ink remaining that
will pause the printer (0% = disabled, printer will not be paused).
Fig. 3-11. Printer Properties - Configure