HP XC System Software Administration Guide Version 3.2

6. Enter the escape character returned by the console command in Step 3 to end the connection.
Note:
Some nodes, depending on the machine type, accept a key sequence to enter and exit their
command-line mode. See Table 13-1 to determine if these key sequences apply to your node
machine type. Do not enter the key sequence to enter command-line mode. Doing so stops the
Console Management Facility (CMF) from logging the console data for the node. If command-line
mode is entered, use the key sequence to exit it to restore console data logging by CMF.
Table 13-1 Command-Line Mode Enter and Exit Key Sequences
Key Sequence to Exit Command-Line
Mode
Key Sequence to Enter Command-Line
Mode
Node Machine Type
ESC QESC (ProLiant DL140 G2
ESC QESC (ProLiant DL145 G1
ESC QESC (ProLiant DL145 G2
vsp ENTERESC (ProLiant DL385 G1
vsp ENTERESC (ProLiant DL585 G1
N/AN/Aserver rx2600
N/AN/Aserver rx2620
N/AN/Aserver rx1600
N/AN/Aserver rx1620
N/AN/Aserver rx4640
N/AN/Aserver rx8620
vsp ENTERESC (ProLiant DL360 G4
vsp ENTERESC (ProLiant DL380 G4
N/AN/Ahp workstation xw8200
N/AN/Ahp workstation xw9300
The output of the console command is logged in the
/hptc_cluster/adm/logs/cmf.dated/date/console-name.log file, where date
indicates the date the command ran, and console-name indicates the console.
158 Connecting to a Remote Console