HP XC System Software Installation Guide Version 3.1

upgradesys output logged to /var/log/upgradesys/upgradesys.log
CAUTION: Do not proceed to the next step in the upgrade process if the output from the upgradesys
script indicates failures. If you cannot determine how to resolve these errors, contact the HP XC
Support organization at the following e-mail address:
[e-mail]
2. Review the /opt/hptc/systemimager/etc/base_exclude_file to determine if you want to
exclude files from the golden image beyond what is already excluded. You revise the base_exclude
file file because it is the file that is read when the golden image is re-created as part of the upgrade
process. The HP XC System Software Administration Guide describes how to add exclusions to this file.
3. Decide on the cluster_config option to use to configure the upgraded system. Table 5-8 describes
two options to the cluster_config utility that you can use to reconfigure a system after a software
upgrade. The option you choose depends upon how you want the upgrade to proceed.
Table 5-8 Upgrade Options for the cluster_config Utility
--init Option--migrate Option
Initializes (resets) your existing node role assignments and
configures the system with the default node role assignments
introduced in HP XC Version 3.1.
The default roles and assignments have been optimized for
performance in HP XC Version 3.1, and you may decide that
this configuration is better suited for your environment.
See Appendix F (page 137) for a description of roles and the
services provided by them, as well as the default node role
assignments.
Performs a series of known migration steps to bring existing,
recognized roles in the configuration and management
database into alignment with the new roles introduced in this
release.
Using this option does not guarantee the correct migration
steps for unrecognized (user-created) roles and services in the
configuration and management database.
Before you decide to use this option, view the
/opt/hptc/etc/sysconfig/upgrade/role_migration.ini
file to see how the previous role assignments compare to the
roles provided in HP XC Version 3.1.
4. Change directory to the configuration directory:
# cd /opt/hptc/config/sbin
5. Specify one of the following cluster_config options:
• To migrate the existing system configuration:
# ./cluster_config --migrate
• To apply new default role assignments to the existing system configuration:
# ./cluster_config --init
6. If you followed the instructions in “Task 9: Plan a Service Availability Strategy” (page 26) to install
an availability tool and position related scripts to set up improved availability of services, you are
prompted to configure availability sets now. “Task 8: Configure Availability Sets” (page 66) describes
how to configure availability sets. Return to this section when you are done.
5.9 Task 8: Configure the System and Propagate the Golden Image 105