HP XC System Software Installation Guide Version 4.0

The following configuration questions are specific to HP RGS:
Do you want to use the RGS sender on the head node (y/n)? [n]
You have installed RGS Sender 4.0.0. Will you be using
RGS Receiver 3.0 to connect this cluster (y/n)? [n]
15. If you assigned the ldap_server role to a node, you are prompted to specify LDAP
configuration information. Otherwise, skip this step.
NOTE: The following sample configuration session sets up example.com as the domain
name. Substitute example.com for your domain.
Executing C60ldap gconfigure
Lightweight Directory Access Protocol (LDAP) Configuration
This step sets up LDAP master and replication servers within the XC system
to augment existing Linux user authentication.
Both internal and external LDAP servers are supported. The LDAP servers
are configured to attempt connections to the local LDAP servers
before querying external LDAP servers.
You must provide the following LDAP configuration information:
1) The IP address of the master server if it is external to the XC system
2) The host name of the master server if it is an internal node
2) The base domain of the LDAP data base
3) The common name and password of the admin and sync users
Is the LDAP master server external to the XC system (y/n)? [n]:
Enter the IP address of the external master server []: IP_address
Enter the host names of the internal replication servers in a space
separated list []: n5 n6
Enter the IP addresses of the external replication servers in a space
separated list []:
Enter the top of the LDAP directory base (dc=) in a comma
separated list [o=xc]: dc=example,dc=com
Enter configuration information for the LDAP admin
user [cn=admin]: uid=ldap,ou=Admin
Enter the admin password:
Confirm the admin password:
Enter configuration information for the LDAP sync
user [cn=sync]: uid=ldap,ou=Admin
Enter the sync password:
Confirm the sync password:
These are your settings:
LDAP master server: IP_address
LDAP internal replication servers: n5 n6
LDAP external replication servers:
LDAP base: dc=example,dc=com
LDAP admin user: uid=ldap,ou=Admin,dc=example,dc=com
LDAP sync user: uid=ldap,ou=Admin,dc=example,dc=com
Are these LDAP settings correct? (y/n) [n]:
If you want to make additional LDAP configuration settings, edit the LDAP
configuration files now before the golden image is created. Or, create
110 Configuring and Imaging the System