HP XC System Software Installation Guide Version 4.0

to learn more about your new LSF cluster.
***Begin LSF-HPC Post-Processing***
No patches to be installed
Created '/hptc_cluster/lsf/tmp'...
Editing /opt/hptc/lsf/top/conf/lsf.cluster.hptclsf...
Moving /opt/hptc/lsf/top/conf/lsf.cluster.hptclsf
to /opt/hptc/lsf/top/conf/lsf.cluster.hptclsf.old.8549...
Editing /opt/hptc/lsf/top/conf/lsf.conf...
Moving /opt/hptc/lsf/top/conf/lsf.conf
to /opt/hptc/lsf/top/conf/lsf.conf.old.8549...
Editing /opt/hptc/lsf/top/conf/lsbatch/hptclsf/configdir/lsb.params...
Moving /opt/hptc/lsf/top/conf/lsbatch/hptclsf/configdir/lsb.params
to /opt/hptc/lsf/top/conf/lsbatch/hptclsf/configdir/lsb.params.old.8549...
Replaced default lsb.queues with a preconfigured lsb.queues.
C95lsf finished
Executing C98db_ic gconfigure
25. Create the golden image:
All user specified configuration is complete.
The Golden Image will be created next.
[P]roceed, [Q]uit:
• Enter the letter p to create the golden image. Proceed to step 26.
• Enter the letter q to exit the cluster_config utility and change your responses.
Exiting now does not create the golden image, and your previous responses are stored
in the configuration management database. The next time you re-run the
cluster_config utility, your previous responses are used as the default responses.
26. Follow along as the golden image is created and all system services are configured and
started. This process can take up to one hour to complete.
CAUTION: Do not press Ctrl-c to stop or interrupt the golden image creation. Doing so
corrupts the golden image.
If you corrupt the golden image, use the following command to remove the base image file
(/var/lib/systemimager/images/base_image) to recover from a corrupted golden
image:
# si_rmimage base_image
Start the cluster_config process again.
Configuring the image replication environment
Initializing 172.31.47.238 as golden client
Updating the golden image. This will take a few moments.
WARNING: failed to copy boot files from the image (ignore this warning
if you are not using UYOK).
1
Setting up the bootserver
Linking client nodes to their autoinstall script
Initializing service persistence
Sanitizing services in the golden image
Image replication environment configuration complete.
info: nconfig started
info: Executing on head node
info: Executing C02network nconfigure
info: Executing C04ip6tables nconfigure
info: Executing C04iptables nconfigure
info: Executing C06nfs_server nconfigure
info: Executing C08ntp nconfigure
6.5 Responding to cluster_config Questions 115