HP XC System Software Installation Guide Version 4.0

8.7 Creating a Baseline Report of the System Configuration
The sys_check utility is a data collection tool that is used to diagnose system errors and
problems. Use the sys_check utility now to create a baseline report of the system configuration
(software and hardware).
The sys_check utility collects configuration data only for the node on which it is run unless
you set and export the SYS_CHECK_SYSWIDE variable, which collects configuration data for all
nodes in the HP XC system.
Use the following commands to initiate the sys_check utility in its simplest form:
# export SYS_CHECK_SYSWIDE=1
# sys_check > /tmp/filename.html
By default, the sys_check utility creates the report in HTML format, but there is an option to
create a text version. You can redirect the output of the sys_check report to the directory and
file name of your choice.
For more information about this utility and its options, see the HP XC System Software
Administration Guide and sys_check(8) .
8.8 You Are Done
Your HP XC system is now fully installed, configured, and operational.
8.7 Creating a Baseline Report of the System Configuration 135