HP XC System Software Installation Guide Version 4.0

Table A-1 Installation and Configuration Checklist (continued)
ReferenceTask and Description
“Starting Availability Tools” (page 125)28. Start availability tools if you configured services for improved availability
(optional).
“Configuring SNMP Trap Destination
for Enclosures” (page 126)
29. Configure SNMP trap destinations for enclosures (optional).
“Configuring SNMP Trap Destination
for Modular Cooling System Devices”
(page 127)
30. Configure SNMP trap destinations for MCS devices (optional).
“Finalizing the Configuration of
Compute Resources” (page 123)
31. Confirm proper operation of compute resources: verify SLURM and
LSF.
“Generating an SVA Site Configuration
File” (page 128)
32. Create an SVA configuration file if you installed SVA.
Verifying the System
“Verifying the LSF Configuration”
(page 129)
33. Verify proper operation of LSF if you installed LSF.
“Verifying Availability Tools” (page 130)34. Verify proper operation of availability tools if you installed and
configured an availability tool.
“Running the OVP to Verify Software
and Hardware Components” (page 131)
35. Run the operation verification program (OVP).
“Running the SVA OVP Utility”
(page 133)
36. Run the SVA OVP if you installed SVA.
“Viewing System Health” (page 133)
37. Verify system health with the Nagios web interface and the nrg
command.
“Creating a Baseline Copy of the
Database” (page 134)
38. Create a snapshot of the configuration and management database for
future use.
“Creating a Baseline Report of the
System Configuration” (page 135)
39. Run the sys_check utility to create a baseline report of the system
configuration.
189