HP XC System Software Installation Guide Version 4.0

Restarting dhcpd waiting for network component at 172.31.32.2 to
become available.
........
switchName blc1nxcsw001708ad3740-24 switchIP 172.31.32.2 type 2626
switchName blc1nxcsw000000000000-0 switchIP 172.31.32.1 type 2824
5. If you captured the output of the discover command in a file (described in step 2), press
Ctrl-d to end the script session now.
This file is for your information only. Store this file in a directory where you keep
administrative data.
Proceed to Section 4.3.2 (page 70) to set the OA password and make BIOS settings.
4.3.2 Setting the OA Password and Make BIOS Settings
Discovering the switches activated the administration network, so you can now log in to the OA
on every enclosure and set a common user name and password and make the appropriate BIOS
settings on all server blade nodes. These tasks are documented in the HP XC Hardware Preparation
Guide (BIOS settings depend upon the hardware model type).
Return here when you have finished with those tasks and proceed to Section 4.3.3 (page 70).
4.3.3 Discovering All Nodes and Enclosures
Follow this procedure to discover all enclosures and all nodes (including server blades) in the
hardware configuration. This discovery process assigns IP addresses to all hardware components:
1. Begin this procedure as the root user on the head node.
2. Start a script to capture command output into a file. This step is optional, but HP recommends
doing so.
# script your_filename
3. Change to the following directory:
# cd /opt/hptc/config/sbin
4. Discover all enclosures:
# ./discover --enclosurebased --enclosures
Discovery - XC Cluster version HP XC Vn.n time_stamp
Enter the common user name for all console port management devices:
your_username
Please enter the password for your_username: your_password
Please re-enter password: your_password
Discovering blade enclosures ...
Checking switch 172.31.32.2 for active ports ...done
Getting MAC addresses from switch 172.31.32.2 ... done
Checking switch 172.31.32.1 for active ports ...done
Getting MAC addresses from switch 172.31.32.1 ... done
Enclosure blc1n-enc09USE6391TF5 found
Discovering virtual enclosures ...
Checking switch 172.31.32.2 for active ports ... done
Getting MAC Addresses from switch 172.31.32.2 ... done
Checking switch 172.31.32.1 for active ports ... done
Getting MAC Addresses from switch 172.31.32.1 ...done
5. Discover all nodes:
# ./discover --enclosurebased --nodesonly [--extended {contiguous|non-contiguous}] --verbose
70 Discovering Hardware Components