HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 CLI Reference Guide

openUnallocatedCapacity=7,227,624,640
openUnallocatedActualCapacity=6,090,395,200
openReservedCapacity=254,005,440
openReservedActualCapacity=254,005,440
numberOfReservedLUs=41
numberOfOpenReservedLUs=41
numberOfImReservedLUs=0
distributedMode=-1
List of 1 LogicalDKC elements:
An instance of LogicalDKC
logicalDKCNumber=00
mfLogicalSerialNumber=12345
*****: The value is encoded by the CLI.
GetStorageArray (subtarget=LogicalUnit)
GetStorageArray (subtarget=LogicalUnit) obtains the information about one or all logical
units (LUs) in one or all storage systems.
Parameters
Table 55 GetStorageArray (subtarget=LogicalUnit) command parameters
DescriptionStatusParameter name
Specify LogicalUnit.
Required
subtarget
Serial number of the storage system
If you omit this parameter, all the storage systems become the
target.
Optional
serialnum
Model of the storage system
If you omit this parameter, all the storage systems become the
target.
Optional
model
Filter for selecting a logical unit
Available values are ALL, ASSIGNED, FREE, UNASSIGNED, and
RESERVED.
If you omit this parameter or specify ALL, you will obtain
information about all the logical units.
If you specify ASSIGNED, you will obtain the information about
the logical units that have a LUN assigned.
If you specify FREE, you will obtain the information about logical
units that do not have a LUN assigned.
If you specify UNASSIGNED, among the information about the
logical units that do not have a LUN assigned, you will obtain
the information about the logical units to which a LUN can be
assigned by using Device Manager.
If you specify RESERVED, among the information about the logical
units that do not have a LUN assigned, you will obtain the
information about the logical units to which a LUN cannot be
assigned by using Device Manager.
Optional
lufilter
CLI Reference Guide 149