HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 CLI Reference Guide

DescriptionStatusParameter name
Filter for selecting a logical unit
Specify the object ID of the LDEV.
Only the logical units corresponding to the LDEV of the specified
object ID are returned. Specify the object ID obtained from another
CLI response. The value is encoded by the CLI.
Optional
lufilterchil-
did
Specific information about the logical unit
The values you can specify are Path, LDEV, and
VolumeConnection. If you specify multiple values at the same
time, separate values by commas.
Optional
lusubinfo
Object ID of the logical unit
Specify this parameter when you want to obtain information about
a specific logical unit. If you specify this parameter, you must also
specify the model and serialnum parameters. If you specify
the model and serialnum parameters, and omit the objectid
parameter, information about logical units in the specified storage
system is obtained. Specify the object ID obtained from another
CLI response. The value is encoded by the CLI.
Optional
objectid
Specific information about the logical unit path
The value you can specify is HostInfo or WWN.
If you specify this parameter, you must also specify
lusubinfo=Path.
Optional
pathsubinfo
Information about the LDEV
The value you can specify is VolumeConnection. If you specify
this parameter, you must also specify the lusubinfo=LDEV.
Optional
ldevsubinfo
Filter for selecting a THP/Smart volume
Specify either the pool ID of a THP/Smart pool, or Unassigned.
If you specify the pool ID of a THP/Smart pool, information about
the THP/Smart volumes assigned to that THP/Smart pool is
obtained.
If you specify Unassigned, information about THP/Smart
volumes not assigned to a THP/Smart pool is obtained.
This information cannot be obtained by the partitioned storage
administrator.
If you specify model and serialnum at the same time, the
specification for this parameter becomes invalid.
Optional
thpvolfilter
Starting sequence number of logical units for which information
is to be obtained
Specify this parameter when you want to obtain information for
a part of logical units in a specific storage system.
When the logical unit information is ordered by device number
(in ascending order) from 0, specify the first number in the
sequence of logical units that you want to obtain.
This parameter must be specified together with the
numOfElementsFilter, model, and serialnum parameters.
Optional
startElement-
NumFilter
Command reference150