HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 CLI Reference Guide

An instance of Path
objectID=*****
devNum=99
displayDevNum=00:63
portID=7
portName=CL1-H
domainID=0
scsiID=15
LUN=99
wwnSecurityValidity=true
List of 2 WWN elements:
An instance of WWN
WWN=88.77.77.77.77.77.00.01
nickname=Jane
An instance of WWN
WWN=88.77.77.77.77.77.00.02
nickname=Jone
*****: The value is encoded by the CLI.
GetStorageArray (subtarget=PDEV)
GetStorageArray (subtarget=PDEV) obtains the information about PDEVs.
Parameters
Table 58 GetStorageArray (subtarget=PDEV) command parameters
DescriptionStatusParameter name
Specify PDEV.
Required
subtarget
Serial number of the storage system
If you omit this parameter, all the storage systems become the
target.
Optional
serialnum
Model of the storage system
If you omit this parameter, all the storage systems become the
target.
Optional
model
Object ID of the parity group containing the PDEVs to be returned
Specify this parameter when you want to obtain information about
the PDEVs in a specific parity group. If you specify this parameter,
you must also specify the model and serialnum parameters.
If you specify the model and serialnum parameters and omit
the arraygroupobjid parameter, information about the PDEVs
in parity groups of the specified storage system is obtained.
When obtaining information about all the parity groups and
PDEVs, specify ALL. Specify the object ID obtained from another
CLI response. The value is encoded by the CLI.
Optional
array-
groupobjid
Command reference162