HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 CLI Reference Guide

Parameters
Table 75 RunZeroPageReclaim Command Parameters
DescriptionStatusParameter Name
Serial number of the storage systemRequired
serialnum
Model of the storage systemRequired
model
Device number(s) of THP/Smart volume(s)
Specify this parameter as a decimal number or colon-delimited
hexadecimal number in the format ww:xx:yy, where ww is the
LDKC number, xx is the CU number, and yy is the LDEV number.
ww is optional. If ww is omitted, LDKC is assumed to be 0.
Use a comma to delimit multiple values.
Required
devnums
Parameter values to obtain in advance
serialnum and model
Obtain these values from the execution result of the GetStorageArray command. In the execution
result, use the arrayType value or the displayArrayType value to specify the model para-
meter, and use the serialNumber value to specify the serialnum parameter.
devnums
Obtain this value from the execution result of the GetStorageArray (subtarget=LDEV)
command. Execute this command by specifying only the model and serialnum parameters,
and LDEV for the subtarget parameter. In the execution result of this command, the devNum
value of an LDEV appears under An instance of LDEV. Use this devNum value to specify
the devnums parameter.
Command execution example
hdvmcli RunZeroPageReclaim -o "D:\logs\RunZeroPageReclaim.log"
model=XP24000 serialnum=10007 devnums=06:AC
Command execution result
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
List of 1 Lu elements:
An instance of LogicalUnit
objectID=*****
devNum=1,708
displayName=00:06:AC
emulation=OPEN-V
devCount=1
devType=
capacityInKB=1,049,280
Command reference218