HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 CLI Reference Guide

sysVolFlag=0
externalVolume=0
differentialManagement=false
snapshotPoolID=-1
journalPoolID=-1
thpType=1
consumedCapacityInKB=10,486,080
thpPoolID=1
threshold=-1
tcaPoolID=-1
thpPoolVolControlFlag=1
managementAreaPoolID=-1
.
. (repeated for other LogicalUnit instances)
.
*****: The value is encoded by the CLI.
Logical group commands
The logical group commands can be used to obtain logical group information.
When using the Core CLI/SMI-S license, you cannot use the logical group commands. For details
about the Core CLI/SMI-S license, see “Device Manager licenses” on page 18.
GetLogicalGroup
GetLogicalGroup obtains information about logical groups. If a logical group is specified that
contains other logical groups, only the information about the specified logical group is obtained.
Information about the logical groups within the specified logical group is not obtained.
Parameters
Table 77 GetLogicalGroup command parameters
DescriptionStatusParameter name
Object ID of the desired logical group
Omit this parameter to include all logical groups. Specify the
object ID obtained from another CLI response. The value is
encoded by the CLI.
Do not specify the objectid and logicalpath parameters
at the same time. If they are specified at the same time, an error
will occur.
Optional
objectid
Path of the logical group to be obtained
Do not specify the objectid and logicalpath parameter at
the same time. If they are specified at the same time, an error will
occur.
Optional
logicalpath
Specify this parameter if you want to obtain information about
an element in addition to information about the logical group.
The only value that can be specified is Path. This setting is not
case sensitive.
Optional
subtarget
CLI Reference Guide 223