HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 CLI Reference Guide

Parameters
Table 78 AddLun command parameters
DescriptionStatusParameter name
Serial number of the new path's storage systemRequired
serialnum
Model of the new path's storage systemRequired
model
Name of the new path
You can use a character string of 1-64 bytes for a name.
Spaces at the beginning or end of a name are not registered.
Optional
name
Port number of the new path
Specify either port or portname. Do not specify both
parameters at the same time. If they are specified at the same
time, an error will occur.
Optional
port
Port name of the new path
Specify either port or portname. Do not specify both
parameters at the same time. If they are specified at the same
time, an error will occur.
Optional
portname
Domain ID of the new path
You cannot specify this parameter and the domainnickname
parameter at the same time. If they are specified at the same time,
an error will occur.
This parameter can be specified in decimal and hexadecimal. If
you specify a hexadecimal number, add the 0x prefix.
The execution results are output in decimal.
Optional
domain
Nickname of the host storage domain of the new path
You cannot specify this parameter and the domain parameter at
the same time. If they are specified at the same time, an error will
occur.
Optional
domainnickname
SCSI ID of the new path
For Fibre Channel, specify 15.
Optional
scsi
Actual LUN used for new pathRequired
lun
CLI Reference Guide 227